A Java method is a collection of statements that are grouped together
to perform an operation. When you call the System.out.println method,
for example, the system actually executes several statements in order to
display a message on the console.
Now you will learn how to create your own methods with or without
return values, invoke a method with or without parameters, overload
methods using the same names, and apply method abstraction in the
program design.
Creating a Method:
In general, a method has the following syntax:
modifier returnValueType methodName(list of parameters) {
// Method body;
}
|
A method definition consists of a method header and a method body. Here are all the parts of a method:
- Modifiers: The modifier, which is optional, tells the compiler how to call the method. This defines the access type of the method.
- Return Type: A method may return a value. The
returnValueType is the data type of the value the method returns. Some
methods perform the desired operations without returning a value. In
this case, the returnValueType is the keyword void.
- Method Name: This is the actual name of the method. The method name and the parameter list together constitute the method signature.
- Parameters: A parameter is like a placeholder. When a
method is invoked, you pass a value to the parameter. This value is
referred to as actual parameter or argument. The parameter list refers
to the type, order, and number of the parameters of a method. Parameters
are optional; that is, a method may contain no parameters.
- Method Body: The method body contains a collection of statements that define what the method does.
Note: In certain other languages, methods are referred to as
procedures and functions. A method with a nonvoid return value type is
called a function; a method with a void return value type is called a
procedure.
Example:
Here is the source code of the above defined method called max().
This method takes two parameters num1 and num2 and returns the maximum
between the two:
/** Return the max between two numbers */
public static int max(int num1, int num2) {
int result;
if (num1 > num2)
result = num1;
else
result = num2;
return result;
}
|
Calling a Method:
In creating a method, you give a definition of what the method is to
do. To use a method, you have to call or invoke it. There are two ways
to call a method; the choice is based on whether the method returns a
value or not.
When a program calls a method, program control is transferred to the
called method. A called method returns control to the caller when its
return statement is executed or when its method-ending closing brace is
reached.
If the method returns a value, a call to the method is usually treated as a value. For example:
int larger = max(30, 40);
|
If the method returns void, a call to the method must be a statement.
For example, the method println returns void. The following call is a
statement:
System.out.println("Welcome to Java!");
|
Example:
Following is the example to demonstrate how to define a method and how to call it:
public class TestMax {
/** Main method */
public static void main(String[] args) {
int i = 5;
int j = 2;
int k = max(i, j);
System.out.println("The maximum between " + i +
" and " + j + " is " + k);
}
/** Return the max between two numbers */
public static int max(int num1, int num2) {
int result;
if (num1 > num2)
result = num1;
else
result = num2;
return result;
}
|
This would produce following result:
The maximum between 5 and 2 is 5
|
This program contains the main method and the max method. The main
method is just like any other method except that it is invoked by the
JVM.
The main method's header is always the same, like the one in this
example, with the modifiers public and static, return value type void,
method name main, and a parameter of the String[] type. String[]
indicates that the parameter is an array of String.
The void Keyword:
This section shows how to declare and invoke a void method. Following
example gives a program that declares a method named printGrade and
invokes it to print the grade for a given score.
Example:
public class TestVoidMethod {
public static void main(String[] args) {
printGrade(78.5);
}
public static void printGrade(double score) {
if (score >= 90.0) {
System.out.println('A');
}
else if (score >= 80.0) {
System.out.println('B');
}
else if (score >= 70.0) {
System.out.println('C');
}
else if (score >= 60.0) {
System.out.println('D');
}
else {
System.out.println('F');
}
}
}
|
This would produce following result:
Here the printGrade method is a void method. It does not return any
value. A call to a void method must be a statement. So, it is invoked as
a statement in line 3 in the main method. This statement is like any
Java statement terminated with a semicolon.
Passing Parameters by Values:
When calling a method, you need to provide arguments, which must be
given in the same order as their respective parameters in the method
specification. This is known as parameter order association.
For example, the following method prints a message n times:
public static void nPrintln(String message, int n) {
for (int i = 0; i < n; i++)
System.out.println(message);
}
|
Here, you can use nPrintln("Hello", 3) to print "Hello" three times.
The nPrintln("Hello", 3) statement passes the actual string parameter,
"Hello", to the parameter, message; passes 3 to n; and prints "Hello"
three times. However, the statement nPrintln(3, "Hello") would be wrong.
When you invoke a method with a parameter, the value of the argument
is passed to the parameter. This is referred to as pass-by-value. If the
argument is a variable rather than a literal value, the value of the
variable is passed to the parameter. The variable is not affected,
regardless of the changes made to the parameter inside the method.
For simplicity, Java programmers often say passing an argument x to a
parameter y, which actually means passing the value of x to y.
Example:
Following is a program that demonstrates the effect of passing by
value. The program creates a method for swapping two variables. The swap
method is invoked by passing two arguments. Interestingly, the values
of the arguments are not changed after the method is invoked.
public class TestPassByValue {
public static void main(String[] args) {
int num1 = 1;
int num2 = 2;
System.out.println("Before swap method, num1 is " +
num1 + " and num2 is " + num2);
// Invoke the swap method
swap(num1, num2);
System.out.println("After swap method, num1 is " +
num1 + " and num2 is " + num2);
}
/** Method to swap two variables */
public static void swap(int n1, int n2) {
System.out.println("\tInside the swap method");
System.out.println("\t\tBefore swapping n1 is " + n1
+ " n2 is " + n2);
// Swap n1 with n2
int temp = n1;
n1 = n2;
n2 = temp;
System.out.println("\t\tAfter swapping n1 is " + n1
+ " n2 is " + n2);
}
}
|
This would produce following result:
Before swap method, num1 is 1 and num2 is 2
Inside the swap method
Before swapping n1 is 1 n2 is 2
After swapping n1 is 2 n2 is 1
After swap method, num1 is 1 and num2 is 2
|
Overloading Methods:
The max method that was used earlier works only with the int data
type. But what if you need to find which of two floating-point numbers
has the maximum value? The solution is to create another method with the
same name but different parameters, as shown in the following code:
public static double max(double num1, double num2) {
if (num1 > num2)
return num1;
else
return num2;
}
|
If you call max with int parameters, the max method that expects int
parameters will be invoked; if you call max with double parameters, the
max method that expects double parameters will be invoked. This is
referred to as
method overloading; that is, two methods have the same name but different parameter lists within one class.
The Java compiler determines which method is used based on the method
signature. Overloading methods can make programs clearer and more
readable. Methods that perform closely related tasks should be given the
same name.
Overloaded methods must have different parameter lists. You cannot
overload methods based on different modifiers or return types. Sometimes
there are two or more possible matches for an invocation of a method
due to similar method signature, so the compiler cannot determine the
most specific match. This is referred to as ambiguous invocation.
The Scope of Variables:
The scope of a variable is the part of the program where the variable
can be referenced. A variable defined inside a method is referred to as
a local variable.
The scope of a local variable starts from its declaration and
continues to the end of the block that contains the variable. A local
variable must be declared before it can be used.
A parameter is actually a local variable. The scope of a method parameter covers the entire method.
A variable declared in the initial action part of a for loop header
has its scope in the entire loop. But a variable declared inside a for
loop body has its scope limited in the loop body from its declaration to
the end of the block that contains the variable as shown below:
You can declare a local variable with the same name multiple times in
different non-nesting blocks in a method, but you cannot declare a
local variable twice in nested blocks.
Using Command-Line Arguments:
Sometimes you will want to pass information into a program when you
run it. This is accomplished by passing command-line arguments to main(
).
A command-line argument is the information that directly follows the
program's name on the command line when it is executed. To access the
command-line arguments inside a Java program is quite easy.they are
stored as strings in the String array passed to main( ).
Example:
The following program displays all of the command-line arguments that it is called with:
class CommandLine {
public static void main(String args[]){
for(int i=0; i<args.length; i++){
System.out.println("args[" + i + "]: " +
args[i]);
}
}
}
|
Try executing this program, as shown here:
java CommandLine this is a command line 200 -100
|
This would produce following result:
args[0]: this
args[1]: is
args[2]: a
args[3]: command
args[4]: line
args[5]: 200
args[6]: -100
|
The Constructors:
A constructor initializes an object when it is created. It has the
same name as its class and is syntactically similar to a method.
However, constructors have no explicit return type.
Typically, you will use a constructor to give initial values to the
instance variables defined by the class, or to perform any other startup
procedures required to create a fully formed object.
All classes have constructors, whether you define one or not, because
Java automatically provides a default constructor that initializes all
member variables to zero. However, once you define your own constructor,
the default constructor is no longer used.
Example:
Here is a simple example that uses a constructor:
// A simple constructor.
class MyClass {
int x;
// Following is the constructor
MyClass() {
x = 10;
}
}
|
You would call constructor to initialize objects as follows:
class ConsDemo {
public static void main(String args[]) {
MyClass t1 = new MyClass();
MyClass t2 = new MyClass();
System.out.println(t1.x + " " + t2.x);
}
}
|
Most often you will need a constructor that accepts one or more
parameters. Parameters are added to a constructor in the same way that
they are added to a method:just
declare them inside the parentheses after the constructor's name.
Example:
Here is a simple example that uses a constructor:
// A simple constructor.
class MyClass {
int x;
// Following is the constructor
MyClass(int i ) {
x = i;
}
}
|
You would call constructor to initialize objects as follows:
class ConsDemo {
public static void main(String args[]) {
MyClass t1 = new MyClass( 10 );
MyClass t2 = new MyClass( 20 );
System.out.println(t1.x + " " + t2.x);
}
}
|
This would produce following result:
Variable Arguments(var-args):
JDK 1.5 enables you to pass a variable number of arguments of the
same type to a method. The parameter in the method is declared as
follows:
typeName... parameterName
|
In the method declaration, you specify the type followed by an
ellipsis (...) Only one variable-length parameter may be specified in a
method, and this parameter must be the last parameter. Any regular
parameters must precede it.
Example:
public class VarargsDemo {
public static void main(String args[]) {
// Call method with variable args
printMax(34, 3, 3, 2, 56.5);
printMax(new double[]{1, 2, 3});
}
public static void printMax( double... numbers) {
if (numbers.length == 0) {
System.out.println("No argument passed");
return;
}
double result = numbers[0];
for (int i = 1; i < numbers.length; i++)
if (numbers[i] > result)
result = numbers[i];
System.out.println("The max value is " + result);
}
}
|
This would produce following result:
The max value is 56.5
The max value is 3.0
|
The finalize( ) Method:
It is possible to define a method that will be called just before an
object's final destruction by the garbage collector. This method is
called
finalize( ), and it can be used to ensure that an object terminates cleanly.
For example, you might use finalize( ) to make sure that an open file owned by that object is closed.
To add a finalizer to a class, you simply define the finalize( )
method. The Java runtime calls that method whenever it is about to
recycle an object of that class.
Inside the finalize( ) method you will specify those actions that must be performed before an object is destroyed.
The finalize( ) method has this general form:
protected void finalize( )
{
// finalization code here
}
|
Here, the keyword protected is a specifier that prevents access to finalize( ) by code defined outside its class.
This means that you cannot know when.or even if.finalize( ) will be
executed. For example, if your program ends before garbage collection
occurs, finalize( ) will not execute.
0 comments:
Post a Comment